HXE-24DWT Fine copper wire drawing machine with annealer
I. Application
HXE-24DWT Fine copper wire drawing machine with annealer is used to
draw and anneal single bare copper wire from 0.8mm-1.6mm to
0.1mm-0.6mm.
II. Main Technical parameters
1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.1mm-0.6mm
4. Max. mechanical speed: 2000m/min, capacity say 0.2mm, 1400m/min,
23kg per hour.
5. Dies: 24 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 22KW, Inverter control
8. Annealer motor: AC 3 Phase 3.7KW, Inverter control
9. Take up motor: AC 3 Phase 3.7KW, Inverter control
10. Take up capacity: 50kg for diameter 300mm iron spool
(Customize)
11. Spool size: Diameter 300mm/Max (Customize)
12. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan
268mm
13. Capstan lubrication: Water pipe spray
14. Traversing: 110W synchronous motor,transmission by timing
belts.
15. Brake: 20KG-M Electromagnetic brake
16. Air pressure: 4-6kg/cm2
17. Annealing pulley: Diameter 120mm
18. Annealing volt: DC55V,
19. Annealing current: DC600A ,
20. Annealing motor power: 33KVA
21. Tension control: Annealer & Spooler Tension control by Swing
arms, Air pressure auto adjust.
22. Machine dimension(L*W*H): 3500mm*1600mm*2500mm, Machine
weight:3200kg
23. Power source: 415V, 50Hz(Customized)
III. Components
| Name | Quantity |
| 1. Pay-off stands | 1 set |
| 2. HXE-24DWT main drawing machine | 1 set |
| 3. Electrical cabinet | 1 set |
| 4. Steam generator | 1 set |
| 5. Lubrication tank and Pump | 1 set |
| 6. Bobbin Loading&Unloading trolley | 1 set |
| 7. Spare part for one year | 1 set |
| 8. Others | |
IV. The structure and principle of the machine
4-1.The annealing part, is three-section annealing, consist of
Preheating section, annealing section and drying section. The fix
speed capstan of drawing, the annealing capstans, are driven by the
same motor, through belts, so the speed of drawing, speed of
annealing, is the same, make sure no wire break.
4-2.The annealing capstans, are access to positive and negative
power, make the wire pass through the annealing capstans with
current, by short-circuiting, to preheat, anneal and dry.
4-3.The annealing current and voltage, by auto tracking the drawing
speed to auto adjust.
4-4.To cooling fast to achieve the annealing, the annealing capstan
is under the cooling water. There is a cooling tank at the bottom
of the machine, cooling water, better use fat content of 0.5%
emulsion. The pump shall pump the cooling water through the pipe
and the switch to the annealing door. Adjust the cooling water
switch to make sure the water is in certain height.
4-5.To make sure the wire while annealing, no Oxidation, there is a
steam-in protection pipe, connect the pipe to the Steam generator,
to use the steam to protect the wire from the oxidation.
4-6.In the exit of the drying section, there is a blowing device.
In the device, shall have two dies. Connect the air compressor to
the air compress input pipe, then out by the blowing device, adjust
the switch, to make all the left water of the drying part, on the
surface of the wire, blow away.
V. Advantage and After-sale service
A: Advantage
(A1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(A2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(A3). DC. three-section annealing
(A4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(B1) 1 year for mechanical part.
(B2) 6 month for electrical part.
