HXE-450/13DL Copper rod breakdown machine with annealer (Chinese
supplier)
I. Quick details
HXE-450/13DL Copper rod breakdown machine is used to draw and
anneal single bare copper wire from 8mm to 1.2mm-4.5mm.The drawing
capstans are arranged in a line that are able to work continuously
with drawing speed and electrical control can be matched with each
other.
II. Compositions of equipment
| Name | Quantity |
| 1. Cantilever Pay-off shelf | 1 |
| 2. HXE-450/13DL Main drawing machine | 1 |
| 3. HXE-TH450 Annealing machine | 1 |
| 4. HXE-180 Tension controller | 1 |
| 5. HXE-WF800 Coiler & Basket changer system | 1 |
| 6. HXE-SX630 Double spoolers | 1 |
| 7. Electrical cabinet | 2 |
| 8. Operation panel / With PLC&Touching screen | 1 |
| 9. Steam generator 24KW | 1 |
| 10. Wire Pointing & Threading machine | 1 |
| 11. Copper power filter | 1 |
| 12. Gear oil station | 1 |
| 13. Air compressor & Air tank | 1 |
| 14. Butt welding machine (For 8mm copper rod) | 1 |
| 15. Spare parts | |
III. Main technical parameters
| 1. Inlet | 8mm (Inlet wire straightening function is provided) |
| 2. Outlet | 1.2mm-4.5mm (Final die rotation function is provided) |
| 3. Diameter of capstans | 450mm |
| 4. Speed | 1500m/min, Capacity say 1.2mm, 780kg per hour |
| 5. Slip ratio | 1.4-1.2 decrease |
| 6. Quantity of capstan | 13 |
| 7. Capstan | Tungsten carbide (With wire threading function) |
| 8. Quick dies change | Available / Require less dies |
| 9. Main motor | DC280KW, with DC Controller |
| 10. Fix speed motor | DC75KW, with DC Controller |
| 11. Gear | Changeable |
| 12. Noises of machine | ≤85 db |
| 13. Protection cover | Motor transmission cover installed |
| 14. Others | Heat exchanger for Gear oil is provided |
| 15. Others | All main pipes are provided |
| 16. Others Gear oil station system is provided, including: Pump,
Gear oil tank, Pipes, Oil Pressure Gauge, Signal wire. |
| 17. Others Heat exchanger for Lubrication oil and Heat exchanger
for cooling water, no need. You need prepare one Underground Tank
for Lubrication Oil recycle, one Water Tower for Cooling Water
recycle. |
IV. Advantage and after-sale service
A: Advantage
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
V. Operation&Maintenance
Preparation before running
Check all the lubrication parts of the transmission parts.
Check Wire-break Auto stop device, Safety doors.
Check coolant water, Lubrication oil, Steam, Compressed air.
After checking, jogging machine as lower than 5m/s, check all parts
again.
Operation
Connect power.
Prepare the drawing dies.
Prepare the wire pointing and threading.
According to the die list, place the wires on the capstan, wire
goes through each layer 2-3 times.
Put wire through the fix speed capstan then through the annealer
machine
Annealer machine wire path, please check the Wire path drawing on
the machine.
Then put wire through the Wire passing wheels, Tension device,
Spooler machine.
After the wire path, close Safety door, adjust Drawing lubrication
oil, Coolant water, Steam, Compressed air.
Diameter, Voltage, Current, Speed linkage
Our machine is made according to use`s elongation requirement,
nothing to do with copper wire.
Annealing voltage & Speed
